| Item | Specification / Description |
|---|---|
| Material | Polyolefin (PO) |
| Appearance | Semi-transparent or milky film |
| Thickness | 0.02 mm ~ 0.3 mm (customizable) |
| Width | ≤ 1500 mm (customizable) |
| Softening Point | 90℃ ~ 130℃ |
| Recommended Heat Press Temperature | 100℃ ~ 160℃ |
| Recommended Heat Press Time | 5 ~ 25 seconds |
| Recommended Heat Press Pressure | 0.3 ~ 0.7 MPa |
| Tensile Strength | ≥ 18 MPa |
| Elongation at Break | ≥ 300% |
| Environmental Compliance | RoHS / REACH compliant |
Applications
Packaging Industry: Lamination of flexible packaging materials, bag sealing
Textile Industry: Heat bonding for garments and footwear composite layers
Automotive Industry: Lamination and sealing of interior materials
Electronics Industry: Electronic component encapsulation and insulation bonding
Others: Stationery, household goods, and various composite applications
Instructions for Use
Preparation
Select appropriate heat press equipment such as heat press machines, roller laminators, or ironing machines.
Ensure bonding surfaces are clean, dry, and free of grease or dust.
Heat Press Operation
Place the PO hot melt adhesive film between the substrates to be bonded.
Set suitable temperature, pressure, and time according to product parameters and complete heat pressing.
Cooling and Curing
Allow the bonded materials to cool to room temperature to ensure complete curing and secure adhesion.
Notes
Conduct small sample tests for different materials to optimize process parameters.
Avoid excessive temperatures that could deform or degrade the film.
Store in a cool, dry place away from direct sunlight and high temperatures.
Reviews
There are no reviews yet.